Hardwired Combo Smoke & Carbon Monoxide Detector, 9V Battery Backup Interconnectable, 5600

Rely Essentials

(No reviews yet) Write a Review
  • Enhanced detection technology - reduces nuisance alarms often caused by cooking and offers early warning. Carefully tested to meet the latest UL standards (meets UL 217 8th and 9th Edition)
  • Interconnect-capable - when one alarm sounds, all compatible alarms will also sound
  • 2-in-1 Detection - alerts for smoke and carbon monoxide in a single alarm
  • Battery backup - ensures continuous protection during power outages

The Rely Essentials hardwired combination smoke and carbon monoxide alarm meets new industry standards with advanced technology that offers early warnings and helps reduce nuisance alarms. This combined smoke and carbon monoxide detector provides dependable protection and is simple to install and maintain. This interconnected smoke alarm enhances safety by ensuring that if one alarm detects danger, all connected alarms will sound, alerting everyone in the home. This feature can be particularly beneficial in larger homes where a single alarm might not be heard throughout the entire space. Thoroughly tested and designed to meet the latest UL safety standards, this smoke alarm operates on 120V AC power with a 9-volt replaceable backup battery (included) for continuous detection even during power outages.

  • Enhanced detection technology - reduces nuisance alarms often caused by cooking and offers early warning. Carefully tested to meet the latest UL standards (meets UL 217 8th and 9th Edition)
  • Interconnect-capable - when one alarm sounds, all compatible alarms will also sound
  • 2-in-1 Detection - alerts for smoke and carbon monoxide in a single alarm
  • Battery backup - ensures continuous protection during power outages
  • Easy to use - The large Test/Hush button makes it easy to test the detector and silence false alarms
  • Loud 85db alarm
  • Low battery warning
  • LED lights indicates alarm status
  • 10-year limited warranty
  • Complies with the following authorities:
  • Underwriters Laboratories (UL)
  • National Fire Protection Association (NFPA)
  • California State Fire Marshal (CSFM)
POWER:
120VAC (60 Hz, 42 mA max) wire-in connector with one 9-volt battery backup
OPERATION CURRENT:
<10uA (standby), <80mA (alarm)
ALARM VOLUME:
≥85dB at 10ft@ 3.0 to 3.5 KHz pulsing alarm, with voice messages "Fire!" and/or "Warning! Carbon Monoxide."
ALARM SENSITIVITY:
Smoke Alarm Sensitivity: 2.08%/ft +/-25% OBS
SILENCE Period:
Smoke alarm silence: About 8 minutes, CO silence: About 5 minutes
SMOKE ALARM SOUND PATTERN:
Temporal 3 BI 0.5s - pause 0.5s - BI 0.5s - pause 0.5s - BI 0.5s - pause 1.5s, with the red LED flash, repeat this alarm pattern
COMPLY WITH:
UL STD 217 8th Ed. & 2034 4th Ed.
CO ALARM SENSITIVITY:
70 PPM: Between 60 to 240 minutes 150 PPM: Between 10 to 50 minutes 400 PPM: Between 4 to 15 minutes
TEMPERATURE OPERATING RANGE:
40°F (4.4°C) to 100°F (37.8°C)
HUMIDITY OPERATING RANGE:
10~95% RH non-condensing